Since I began to use CUDA at 44,1 I was able to load like five great reverbs (with lots of kernels: from VNXT to long springs) without problem. Since I'm mixing at 96 I'm having some problems, though. CPU is fine when using some Nebula Reverb Core3 (I'm with one single computer but with Server), I can load a considerable ammount of programs without making suffer my CPU, but when I load one single instance of Nebula CUDA (you know, a copy of the Reverb one but changing the XML with a longer DSPBUFFER and with the Optfreqd @ 15) I'm suffering spikes and CPU issues even with one kernel programs. If I unload the CUDA instance, my CPU goes from 120% to 30% aproximately. Not normal, IMHO.
I don't know if it's an issue of Server with CUDA or if 96 is too much for my computer, but since I'm with an i7 2600 and 16GB RAM I don't think that I'm having a really big problem regarding my computer resources.
Anyone can help me, please?
Thanks in advance!
Really bad CUDA usage mixing at 96KHz
-
enriquesilveti
- Expert
- Posts: 2861
- Joined: Sun Mar 28, 2010 9:00 pm
- Location: Lodi | Madrid | Buenos Aires
- Contact:
Re: Really bad CUDA usage mixing at 96KHz
Which DSPBUFFER in Nebula Reverb CUDA XML/Master page? Try to setup to maximun.
Enrique Silveti.
Acustica Audio customer and technical support.
MBP 11.5 (W10 1803 | OSX 10.13.6 | i7-4870 | 16 GB | 512 GB SSD)
SP4 (W10 1903 | i5-6300 | 8 GB | 256 GB SSD)
Digiface Dante | Lyra2 | Rednet AM2
VM U18 | VM W10 1803 | VM OSX 10.13
N4/NAT4 | SPX4 | RX7 | LN2C | SMAART8 | R5 | PT2019 | PX11 | NIK5
Acustica Audio customer and technical support.
MBP 11.5 (W10 1803 | OSX 10.13.6 | i7-4870 | 16 GB | 512 GB SSD)
SP4 (W10 1903 | i5-6300 | 8 GB | 256 GB SSD)
Digiface Dante | Lyra2 | Rednet AM2
VM U18 | VM W10 1803 | VM OSX 10.13
N4/NAT4 | SPX4 | RX7 | LN2C | SMAART8 | R5 | PT2019 | PX11 | NIK5
Re: Really bad CUDA usage mixing at 96KHz
Setup is at maximum possible, Enriqueenriquesilveti wrote:Which DSPBUFFER in Nebula Reverb CUDA XML/Master page? Try to setup to maximun.
