Purple

[mathias]

could it be, that the xml is not updated with the tag that is necessary for the new method? just a thought ...

this tag needs to be in the purple xml file:
<VECTORSUBPATHPRIORITARY> 1 </VECTORSUBPATHPRIORITARY>

[DarkandKurious]

Hi G, just thought you might like to know that the OSX packs for the M5 and P1 are currently in the P1 folder on Box. I am guessing the OSX AAX packs are not uploaded yet?

[Andrums]

Now I tested with pink noise in 88.2 session
When I load plug it passes audio till 44 kHz(SPAN analyzer)
But when I save and reload session it cuts at 22 Khz
Only solution is to change XML like this
<DEFAULTRATEKHZ> 96 </DEFAULTRATEKHZ>
<FORCEDRATEKHZ> 96 </FORCEDRATEKHZ
and in this case I dont think it loads 88 vectors

Same problem with Aquamarine 3 and I think other plugs

My system
Mac Pro Mac OS 10.11.6
Pro Tools 12.5.2
Studio One 3

[giancarlo]

Now I tested with pink noise in 88.2 session
When I load plug it passes audio till 44 kHz(SPAN analyzer)
But when I save and reload session it cuts at 22 Khz
Only solution is to change XML like this
<DEFAULTRATEKHZ> 96 </DEFAULTRATEKHZ>
<FORCEDRATEKHZ> 96 </FORCEDRATEKHZ
and in this case I dont think it loads 88 vectors

Same problem with Aquamarine 3 and I think other plugs

My system
Mac Pro Mac OS 10.11.6
Pro Tools 12.5.2
Studio One 3

Ok perfect tomorrow we'll try to reproduce it
Normally when it loads it forces the saved preset, so it should never load something else (since the saved preset is forcing the rate, the rate is written inside. I cannot exclude out is loading the correct 88 but trying to sample convert to a different frequency rate, for example 44. It would explain the slowness.
Could you do a very simple test? Inside xml change rateconversion to zero.

[Andrums]

Everything is OK with <RATECONVERSION> 0 </RATECONVERSION> in P-1 XML
I set same 0 in Aquamarine 3 XML and it also pass till 44 kHz now in 88 session with Pre is On but it doesnt have 88 vectors.Is it right?

[giancarlo]

I'll check aquamarine
About purple: there was a tag missing inside the pack. We'll release a fix so nobody will be forced to disable rateconversion

[Andrums]

I think Aquamarine loads 44 or 96 vectors without conversion that is not good.So what is the best settings in Aquamarine XML for 88 sessions until we have 48-88 pack?

[giancarlo]

Don't touch it
We'll release aquamarine with all fixes and all frequencies with a couple of days (we improved the gr meter)

[Andrums]

What RATECONVERSION in this case?

[giancarlo]

Don't touch it. It is the best setting for now

[Andrums]

OK.Waiting.

[Support]

Updates with 48 kHz and 88.2 kHz frequency pack for OSX and Windows for VST,AU and AAX format are in download section of each Purple bundle product.

Also there is a IMPORTANT text note that is important.

[Andrums]

Hi,SUPPORT.
Please add to IMPORTANT text that user manually has to change
RATECONVERSION to 0 in XML.Without that there is a cut at 22kHz in 88 and 96 kHz sessions.
Tested with new installers

[giancarlo]

No we are working to a more elegant way - automatic
We'll keep you updated

[testa]

Thanks for the update! I have a question about the installers. I have to reinstall the 44/96 pack? or just install the new one?? Because with P5 @48/88KHz, my signal drops around 10 dBs.