Configuring Nebula and Nebula Reverb.

Tips & tricks, working results, technical support
buattipaso
User Level 0
User Level 0
Posts: 9
Joined: Sat Mar 26, 2011 3:58 pm

Configuring Nebula and Nebula Reverb.

Post by buattipaso » Wed Jul 06, 2011 5:40 pm

Hi there,
I'm doing right now some blind tests with Nebula and Nebula Reverb, using the R2R and Tb library.
I've noticied some sonic differences between Nebula and the Reverb one. Now I'm a bit confused and I really need your help: with these library is better (better=closer simulation to the real tape machine) use Nebula or Reverb? And in the master page have you any suggestion on particular settings? Thank you in advance!

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Wed Jul 06, 2011 6:01 pm

Giancarlo has said to use the reverb plug for everything. I think the other is included so old projects that contain an older version of Nebula (before the reverb plug) won't break. But what sonic differences do you hear? If one sounds better to your ears, than it is better. Right? I have tested also and have decided that the audio is awesome with the reverb plug and since it is so much better at using resources, the choice is obvious for my needs.
The Sounds of the Hear and Now
http://soundyaudio.com/

buattipaso
User Level 0
User Level 0
Posts: 9
Joined: Sat Mar 26, 2011 3:58 pm

Re: Configuring Nebula and Nebula Reverb.

Post by buattipaso » Wed Jul 06, 2011 6:14 pm

Hi Richie, thanks for the reply, have you changed some settings in the master page? the difference that I hear are in the high freq: the reverb one seems to sound more open (more high frequencies) compared to the original, while the Nebula (regular) is more balanced compared to the original. But the reverb have more impact. It's hard to say who wins! And I'm wondering how master settings influence the sound of Nebula...

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Wed Jul 06, 2011 6:42 pm

Yes I have made many changes to my MAST page, but they have more to do with performance and resource usage than audio quality. And as I said, I prefer the reverb plug by far. I don't know (or really care too much) about accuracy as much as if I like what I hear or not. And with the lighter resource usage with the reverb plug, I am able to get more done and feel better about the audio that I am working on. When I compared the 2 Nebulas, I heard differences, but not in range of quality. Just small differences. As far as changes to the MAST page, I upped the RATE CNV to max (9000) and move the DSPBUFFER to 2048 or 4096. This just gives me more solid performance for my particular set-up.
The Sounds of the Hear and Now
http://soundyaudio.com/

buattipaso
User Level 0
User Level 0
Posts: 9
Joined: Sat Mar 26, 2011 3:58 pm

Re: Configuring Nebula and Nebula Reverb.

Post by buattipaso » Wed Jul 06, 2011 6:46 pm

Thank you very much Richie!

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Wed Jul 06, 2011 6:57 pm

Absolutely no problem! I have received some amazing help from this forum and I'm just at the point of understanding Nebula where I can actually help others. It's amazing technology and I am so excited to be using it at this stage of it's development and at this era of digital audio. Giancarlo is a wealth of info too if you can catch up with him. Michael Angel of CDSoundmasters is also an incredible resource (and an amazing Nebula/Aqua software writer) that has been very generous with his time and knowledge to help me understand some of the finer nuances of this brave new world of Nebula style audio processing. Check out his stuff, it's good. Alex B and Eric at Rhythminmind as well. Cheers and happy music to you. Feel free to ask for help anytime!
The Sounds of the Hear and Now
http://soundyaudio.com/

User avatar
ngarjuna
Expert
Expert
Posts: 779
Joined: Tue Mar 30, 2010 5:04 pm
Location: Miami

Re: Configuring Nebula and Nebula Reverb.

Post by ngarjuna » Wed Jul 06, 2011 8:50 pm

It has been a while but my recollection is that any kernels which exceed the maximum kernel length of the regular "Nebula" instances should be run in "Nebula Reverb" instances for higher fidelity. Since most of us don't really know the individual kernel lengths of every program in our library (I don't even really keep track of the programs I use a lot), it's much easier to use the Reverb instance and know that the kernel length is supported.

I believe the "Nebula" instance is for lowest possible latency. It's a trade-off, though, I don't think you get full quality at those settings.

biomuse
User Level X
User Level X
Posts: 119
Joined: Tue Dec 14, 2010 9:37 am

Re: Configuring Nebula and Nebula Reverb.

Post by biomuse » Thu Jul 07, 2011 12:59 am

Wow, really? So for something like CDSM or AlexB equalizers or consoles we need to use Neb Reverb to get full quality? That could be true but it seems unlikely for something without the long decay times that reverbs have...

Giancarlo, if you have a minute, could you clear this up? Is there any advantage to using Reverb beyond just the high default RATE CNV and buffer settings?

User avatar
yewtreemagic
User Level V
User Level V
Posts: 55
Joined: Mon Mar 21, 2011 11:12 pm
Location: North Cornwall, UK
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by yewtreemagic » Thu Jul 07, 2011 2:51 am

You should rely to some extent on the individual developer to tell you which version to use, but as far as I know most do all their library creation, fine-tuning and final audio auditioning with Nebula Reverb, which is:

a) higher latency than the standard Nebula
but
b) uses less CPU
c) offers a flatter frequency response with less ripples at the bottom end in particular, which might be the difference you're hearing, although it's likely to be subtle.


Martin
Martin Walker
YewTreeMagic

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Thu Jul 07, 2011 5:15 am

Giancarlo has cleared this up. he has said on more than one post to use the Nebula Reverb for everything. Latency shouldn't be considered an issue really. Nebula is not intended to be used while tracking, it's more sensible to use it after tracking when you don't need real time zero latency anyway.
The Sounds of the Hear and Now
http://soundyaudio.com/

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Thu Jul 07, 2011 5:18 am

The Sounds of the Hear and Now
http://soundyaudio.com/

biomuse
User Level X
User Level X
Posts: 119
Joined: Tue Dec 14, 2010 9:37 am

Re: Configuring Nebula and Nebula Reverb.

Post by biomuse » Thu Jul 07, 2011 5:20 am

Thanks for the link.

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Thu Jul 07, 2011 5:33 am

biomuse wrote:Thanks for the link.

Ya mon.
The Sounds of the Hear and Now
http://soundyaudio.com/

biomuse
User Level X
User Level X
Posts: 119
Joined: Tue Dec 14, 2010 9:37 am

Re: Configuring Nebula and Nebula Reverb.

Post by biomuse » Thu Jul 07, 2011 5:50 am

richie43 wrote:Giancarlo has cleared this up. he has said on more than one post to use the Nebula Reverb for everything. Latency shouldn't be considered an issue really. Nebula is not intended to be used while tracking, it's more sensible to use it after tracking when you don't need real time zero latency anyway.
OK, in the thread you posted, Giancarlo unequivocally does not say "to use Nebula Reverb for everything." What he says is that it's OK to use it for anything, not that you should use it for everything. That is a very important difference. Do you have any other threads?

You could still be right, but I'm a little worried that we're promulgating wrong answers based on incorrect interpretations of what the devs have said here...

It would be good if Giancarlo or Enrique could chime in.

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: Configuring Nebula and Nebula Reverb.

Post by richie43 » Thu Jul 07, 2011 7:31 am

Search the forum, I know it's there. I have also heard from a few knowledgeable posters here (Ngarjuna, Mercado, Enriquesilveti, Giancarlo) and I'll say it again; the regular Nebula dll seems to be there for the sake of old projects and compatibility. And in the end, use your ears and decide what (if any) sounds better and is a workable solution as far as work-flow and computer capabilities are concerned. All I know is that my mixes recently are much better than my previous mixes, and the "Nebulized" effect is ALMOST exactly what I remember from my analog days.
Read this. This is in the FAQ for Nebula.

http://www.acustica-audio.com/index.php ... &Itemid=91

Go to the "First run and general usability questions" section, question #4.
The dll's are actually the same, but the XML file (the settings) are different. Think of it as 2 settings of the same plug. The non-reverb dll has lower latency so greater CPU load. Quality will generally be better using the reverb dll, it says. And as I said earlier, Nebula is rough going if you are trying to track with it, so the main benefit of the non-reverb dll (low latency) is moot. You want to be able to access the most kernels as possible, and this is achieved with the reverb dll.
The Sounds of the Hear and Now
http://soundyaudio.com/

Post Reply