Nebula - 1.3.492

Tips & tricks, working results, technical support
Yllet
User Level VII
User Level VII
Posts: 72
Joined: Mon Apr 19, 2010 3:00 pm

Nebula - 1.3.492

Post by Yllet » Sun Jun 05, 2011 5:21 pm

When installing new 1.3.492, no "list" is showing.

What to do?

/Jon

FrankydT
User Level XI
User Level XI
Posts: 166
Joined: Tue Dec 28, 2010 3:47 pm

Re: Nebula - 1.3.492

Post by FrankydT » Sun Jun 05, 2011 5:26 pm

Maybe you installed the setup package, not the upgrade.
This deletes the authorization files. Try re-authorizing

User avatar
enriquesilveti
Expert
Expert
Posts: 2861
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Nebula - 1.3.492

Post by enriquesilveti » Sun Jun 05, 2011 5:34 pm

Last version use new library browser, just click under INIT.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (W10 1803 | OSX 10.13.6 | i7-4870 | 16 GB | 512 GB SSD)
SP4 (W10 1903 | i5-6300 | 8 GB | 256 GB SSD)
Digiface Dante | Lyra2 | Rednet AM2
VM U18 | VM W10 1803 | VM OSX 10.13
N4/NAT4 | SPX4 | RX7 | LN2C | SMAART8 | R5 | PT2019 | PX11 | NIK5

User avatar
yewtreemagic
User Level V
User Level V
Posts: 55
Joined: Mon Mar 21, 2011 11:12 pm
Location: North Cornwall, UK
Contact:

Re: Nebula - 1.3.492

Post by yewtreemagic » Mon Jun 06, 2011 9:02 pm

Enrique is quite correct, although with the current lack of an up to date manual it took me several hours before I finally stumbled across this information in this forum aftger updating and was finally able to browse through my presets again ;)

The new menus are far easier to use when you finally discover them though :lol:

After working with Nebula 3 Pro for about two months I only yesterday discovered that sidechain versions of most of the factory compressors are available as a free download here :o

However, I understand Enrique is currently working on a updated manual containing all this information, so hopefully all will soon be sweetness and light 8-)


Martin
Last edited by yewtreemagic on Mon Jun 06, 2011 9:13 pm, edited 3 times in total.
Martin Walker
YewTreeMagic

Yllet
User Level VII
User Level VII
Posts: 72
Joined: Mon Apr 19, 2010 3:00 pm

Re: Nebula - 1.3.492

Post by Yllet » Mon Jun 06, 2011 9:07 pm

Yepp, too easy actually ;)

everbeatz
User Level VII
User Level VII
Posts: 75
Joined: Tue Apr 06, 2010 3:47 pm
Contact:

Re: Nebula - 1.3.492

Post by everbeatz » Sun Jun 12, 2011 2:19 pm

enriquesilveti wrote:Last version use new library browser, just click under INIT.
Guys, can you put some kind of txt file with installation rar to give the full explanation of new features such as this - it took a lot of my nerves and PMing ngarjuna asking him for help until I finally sorted this out.

This is pretty big change in Nebula and I think developers should have informed us enclosing some kind of info with installation.

Anyway, my nerves are fine now :D

elam
Vip Member
Vip Member
Posts: 425
Joined: Sat May 15, 2010 5:42 pm

Re: Nebula - 1.3.492

Post by elam » Sun Jun 12, 2011 3:42 pm

everlast wrote:can you put some kind of txt file with installation rar to give the full explanation of new features such as this
That's a good idea.Anyway,come a little more often on this forum because there was A LOT of discussion about that for a while....As you know AA team/Nebula depends heavily on this forum.
So check it out more often. ;)

User avatar
enriquesilveti
Expert
Expert
Posts: 2861
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Nebula - 1.3.492

Post by enriquesilveti » Sun Jun 12, 2011 4:33 pm

Let's go one step further! We are writing a full installation user manual.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (W10 1803 | OSX 10.13.6 | i7-4870 | 16 GB | 512 GB SSD)
SP4 (W10 1903 | i5-6300 | 8 GB | 256 GB SSD)
Digiface Dante | Lyra2 | Rednet AM2
VM U18 | VM W10 1803 | VM OSX 10.13
N4/NAT4 | SPX4 | RX7 | LN2C | SMAART8 | R5 | PT2019 | PX11 | NIK5

davida
User Level II
User Level II
Posts: 24
Joined: Fri May 21, 2010 2:19 am

Re: Nebula - 1.3.492

Post by davida » Sun Jun 12, 2011 5:10 pm

Hi Guys,
since I've installed this new version I cannot load any presets... ?
I used the full installer not the update one.
Any advices are welcome

thanx

User avatar
enriquesilveti
Expert
Expert
Posts: 2861
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Nebula - 1.3.492

Post by enriquesilveti » Sun Jun 12, 2011 5:12 pm

Reinstall you KEY or request it again if you lost it.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (W10 1803 | OSX 10.13.6 | i7-4870 | 16 GB | 512 GB SSD)
SP4 (W10 1903 | i5-6300 | 8 GB | 256 GB SSD)
Digiface Dante | Lyra2 | Rednet AM2
VM U18 | VM W10 1803 | VM OSX 10.13
N4/NAT4 | SPX4 | RX7 | LN2C | SMAART8 | R5 | PT2019 | PX11 | NIK5

davida
User Level II
User Level II
Posts: 24
Joined: Fri May 21, 2010 2:19 am

Re: Nebula - 1.3.492

Post by davida » Sun Jun 12, 2011 5:43 pm

Ok thanx, just dropped an email to Giancarlo
;)

blandry
User Level VI
User Level VI
Posts: 66
Joined: Fri Mar 25, 2011 1:07 am

Re: Nebula - 1.3.492

Post by blandry » Mon Jun 13, 2011 10:07 am

Devs, I love you but get it together 8-) The Nebula land is a beta land for a lot of us.

User avatar
gurth
User Level X
User Level X
Posts: 108
Joined: Sun Jul 04, 2010 10:48 am
Location: Holland

Re: Nebula - 1.3.492

Post by gurth » Mon Jun 13, 2011 10:41 am

I tried to install some of the librarys too, but don't see them in the browser.

I see the serial installed in the nebula prepesatoritirali, but the libraries don't show up....

Arne
Member
Member
Posts: 284
Joined: Sat Nov 20, 2010 10:31 pm
Location: Bergen, Norway
Contact:

Re: Nebula - 1.3.492

Post by Arne » Mon Jun 13, 2011 10:55 am

gurth wrote:I tried to install some of the librarys too, but don't see them in the browser. I see the serial installed in the nebula prepesatoritirali, but the libraries don't show up....

There may be several reasons for this. If you run Nebula free PRO library will not show. If you run Nebula Pro you need to run your license file again.

If you used the full installer rather then the upgrade you need to run your license again. Also, if you have not requested your KEY from Acutica you may have to send them your .ser file found in your nebulatemprepository to get the license installer.

Run your license again and it should work.

User avatar
enriquesilveti
Expert
Expert
Posts: 2861
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Nebula - 1.3.492

Post by enriquesilveti » Mon Jun 13, 2011 12:29 pm

I tried to install some of the librarys too, but don't see them in the browser.

I see the serial installed in the nebula prepesatoritirali, but the libraries don't show up....
Please read those posts...

The Nebula tip of the month (#13 - March 2011)
Using new Nebula browser.
http://www.acustica-audio.com/forum/ind ... =viewtopic

Acustica Audio Products Key F.A.Q
http://www.acustica-audio.com/forum/ind ... =viewtopic.

Help us help you (read this before posting)
http://www.acustica-audio.com/forum/ind ... =viewtopic

Contact Us
http://www.acustica-audio.com/index.php ... &Itemid=95
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (W10 1803 | OSX 10.13.6 | i7-4870 | 16 GB | 512 GB SSD)
SP4 (W10 1903 | i5-6300 | 8 GB | 256 GB SSD)
Digiface Dante | Lyra2 | Rednet AM2
VM U18 | VM W10 1803 | VM OSX 10.13
N4/NAT4 | SPX4 | RX7 | LN2C | SMAART8 | R5 | PT2019 | PX11 | NIK5

Post Reply