37J classic valve tape machine released!

Officially Licensed 3rd Party Developer Libraries
Free 3rd Party Programs
RainbowSix
User Level IX
User Level IX
Posts: 92
Joined: Thu Nov 21, 2013 5:15 pm

Re: 37J classic valve tape machine released!

Post by RainbowSix » Mon Dec 12, 2016 3:22 pm

@rick.vdk

It sounds fat if ya do though :)

myimo
User Level VII
User Level VII
Posts: 76
Joined: Fri Feb 15, 2013 12:05 pm

Re: 37J classic valve tape machine released!

Post by myimo » Tue Dec 13, 2016 3:33 am

Hi just to prevent confusion, you can make the J37 as fat as you want by following Tims instructions with regard to stacking tracks and using the supplied saturation. Of course you can do any thing you want with regard to adding stuff but you don't need to go outside of the J37. This tech is more modern than
the earlier tape libraries with regard to natural sounding compression & distortion.

glaca
User Level X
User Level X
Posts: 105
Joined: Sat Jan 23, 2016 7:36 pm

Re: 37J classic valve tape machine released!

Post by glaca » Thu Dec 15, 2016 7:33 am

Short verdict. This thing is stellar. Gives body and definition to all sources you run through. Shines on drums, guitars and master bus. Can't wait to try it on vocals. The fact that it compresses is great. even looking for tape program like this. Great job! Thank you.

User avatar
markgalup
Expert
Expert
Posts: 570
Joined: Sun Feb 10, 2013 6:15 am
Location: Nashville, TN
Contact:

Re: 37J classic valve tape machine released!

Post by markgalup » Wed Jan 04, 2017 9:02 pm

Finally putting this library into action recently - sounds fantastic.

Tim - just wanted to verify based on what I read on your site about "Movement in Time": do the channel instances have LFO frequency response modulation as-is? Just curious if there's something one needs to do to make it modulate or not.

Thanks,
MG
Mark Galup
Producer/Mixer/MFiT-Approved Mastering Engineer
MarkGalup.com
ReelRecording.com
Facebook | Twitter | Instagram

Acustica Audio Dealer for the USA -> Contact me for US Discounts

adrachin
User Level I
User Level I
Posts: 13
Joined: Wed Feb 03, 2016 2:08 am

Re: 37J classic valve tape machine released!

Post by adrachin » Thu Jan 05, 2017 1:15 am

myimo wrote:Hi just to prevent confusion, you can make the J37 as fat as you want by following Tims instructions with regard to stacking tracks and using the supplied saturation
Short question, how do you stack tracks in Nebula? N4 by the way. Seems to be somehow different then 3. Load program for example seems not to have any function.

Thanks

Thomas

User avatar
Shibata
Member
Member
Posts: 210
Joined: Tue Jul 09, 2013 8:06 pm

Re: 37J classic valve tape machine released!

Post by Shibata » Wed Jan 18, 2017 11:51 pm

It sounds like tape) Very delicious!

User avatar
babiuk
Vip Member
Vip Member
Posts: 386
Joined: Tue Oct 19, 2010 11:16 am

Re: 37J classic valve tape machine released!

Post by babiuk » Tue Jan 31, 2017 8:36 am

I just tried for first time j37 at 96khz, I used at 44,1 til now but at 96 I can see that it is really 88KHz... The n2p and n2v are called "...96" but in nebula screen I see they are 44,1... It is the channel preemphasis program by the way. Anyone with this same issue?
Mac Pro 5,1 / 6-core Intel Xeon / 16 GB Ram / El Capitan / Reaper / H******* Mixbuss

User avatar
darren
Member
Member
Posts: 234
Joined: Wed Dec 08, 2010 6:46 pm

Re: 37J classic valve tape machine released!

Post by darren » Tue Jan 31, 2017 3:11 pm

Hi,

Just got this one. I'm really enjoying your libs Tim.

Could you tell me how to point your lib to it's bundled skin please? I'm not using setups..

N4, by the way.
N4. N3 Server. Ultramarine. Scarlet. Sand. Pink 7236. Pink 2412. Pink. Ivory. Green. Aquamarine. Amethyst. Gold.

User avatar
Tim Petherick
Expert
Expert
Posts: 1768
Joined: Sat Apr 17, 2010 4:07 pm
Location: Bath , Uk

Re: 37J classic valve tape machine released!

Post by Tim Petherick » Tue Jan 31, 2017 4:01 pm

babiuk wrote:I just tried for first time j37 at 96khz, I used at 44,1 til now but at 96 I can see that it is really 88KHz... The n2p and n2v are called "...96" but in nebula screen I see they are 44,1... It is the channel preemphasis program by the way. Anyone with this same issue?
Hi,

At the beginning of release I had this problem, I think I made a fix.
Try downloading again and reinstall, they should have this fix.

If it continues let me know.

User avatar
darren
Member
Member
Posts: 234
Joined: Wed Dec 08, 2010 6:46 pm

Re: 37J classic valve tape machine released!

Post by darren » Wed Feb 01, 2017 1:28 pm

Tim, any guidance on linking your skin to the program?
I guess I can use Nebula Setups with N3 but setups is not compatible with N4 right now (makes a mess of the Temp dir for example).

Is there a non-setups way of associating the skin with the program?
N4. N3 Server. Ultramarine. Scarlet. Sand. Pink 7236. Pink 2412. Pink. Ivory. Green. Aquamarine. Amethyst. Gold.

User avatar
darren
Member
Member
Posts: 234
Joined: Wed Dec 08, 2010 6:46 pm

Re: 37J classic valve tape machine released!

Post by darren » Fri Feb 03, 2017 9:17 am

Ah. My answer is in red on you website :)

No, Tims JPN skins are neb3 only.
N4. N3 Server. Ultramarine. Scarlet. Sand. Pink 7236. Pink 2412. Pink. Ivory. Green. Aquamarine. Amethyst. Gold.

User avatar
plexus
Member
Member
Posts: 209
Joined: Sat Jan 03, 2015 4:51 am

Re: 37J classic valve tape machine released!

Post by plexus » Mon Apr 17, 2017 11:23 pm

Hmmm... any idea why this is showing up as "new" in KVR's feed of new plugin products? Something updated? A fluke?

https://www.kvraudio.com/product/37j-by ... -libraries

ce1909
Member
Member
Posts: 283
Joined: Sat Feb 04, 2012 6:16 pm

Re: 37J classic valve tape machine released!

Post by ce1909 » Thu Jul 13, 2017 7:02 pm

BTW anyone that uses DDMF's Metaplugin with this & didn't get the email there's a new version available. $19.00 to upgrade.

User avatar
eaccin
User Level X
User Level X
Posts: 118
Joined: Sun Jan 30, 2011 8:52 am

Re: 37J classic valve tape machine released!

Post by eaccin » Mon Oct 09, 2017 8:14 pm

Hi Tim, I'm trying to import the hiss file to a session but Pro Tools won't read the file. any idea why?

User avatar
Tim Petherick
Expert
Expert
Posts: 1768
Joined: Sat Apr 17, 2010 4:07 pm
Location: Bath , Uk

Re: 37J classic valve tape machine released!

Post by Tim Petherick » Thu Oct 12, 2017 4:12 pm

Hmmmm,

I'm guessing this is a file type problem, I'll update them to work with all systems....

Post Reply