Ultramarine3 ShMod Control Question

Tips & tricks, working results, technical support
Post Reply
realhomerecording
User Level I
User Level I
Posts: 19
Joined: Sun Jul 27, 2014 4:03 am

Ultramarine3 ShMod Control Question

Post by realhomerecording » Tue Sep 13, 2016 3:00 am

Hello,

I was curious as to which ShMod setting would most closely match the original hardware? It doesn't specify in the manual and I don't want to assume that it is the default number 2 setting.

Also, is the ShMod basically a hard knee/soft knee type of effect or is it something else?

One last question (for now). The sidechain filter has what appears to be a female gender symbol. Then there's the OFF setting as well. The default is the female symbol. What is the difference between the two, if any?

User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Ultramarine3 ShMod Control Question

Post by enriquesilveti » Tue Sep 13, 2016 11:22 am

I was curious as to which ShMod setting would most closely match the original hardware? It doesn't specify in the manual and I don't want to assume that it is the default number 2 setting.
Factory default value.
Also, is the ShMod basically a hard knee/soft knee type of effect or is it something else
It is a transient modulator, first time implemented in Pink channel strip.
One last question (for now). The sidechain filter has what appears to be a female gender symbol. Then there's the OFF setting as well. The default is the female symbol. What is the difference between the two, if any?
It is Pink filter, first time implemented in Pink channel strip.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

RJHollins
Expert
Expert
Posts: 3358
Joined: Sun Mar 28, 2010 5:53 pm

Re: Ultramarine3 ShMod Control Question

Post by RJHollins » Tue Sep 13, 2016 7:03 pm

More detailed info needs to be added to the Manual.
i7-5820k, MSI X99A Plus, 16 GIG Ram, Noctua NH-D14, Win-7 Pro [64-bit], Reaper-64

NVC [Nebula Virtual Controllers]

realhomerecording
User Level I
User Level I
Posts: 19
Joined: Sun Jul 27, 2014 4:03 am

Re: Ultramarine3 ShMod Control Question

Post by realhomerecording » Tue Sep 13, 2016 8:58 pm

Thank you for your response, enrique.

Post Reply