Amber3 is out!

Post Reply
User avatar
giancarlo
Founder
Founder
Posts: 11153
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Amber3 is out!

Post by giancarlo » Fri Mar 01, 2019 12:24 am

Free of charge to existing customers

Just to make it crystal clear, in our tech the more we sample, the better. Amber eq was not resampled this time, but fixed using all core 13 techniques. If you want closer behavior with the target you are maybe looking for more gain steps. At each upgrade we decide what to do, following suggestions. In a lot of cases we are resampling, but in order to get a good schedule for all products we have to choose the best compromise. There was no time for resampling the eq this time, we added so many other things to the suite

phopho
User Level IV
User Level IV
Posts: 40
Joined: Tue Dec 03, 2013 4:39 am

Re: Amber3 is out!

Post by phopho » Fri Mar 01, 2019 3:18 pm

You are saving the audio journey of so many music production lovers out there.
All i have to say is thank you Acustica Audio !

All the best,
Chris

kenbobplus3db
User Level IX
User Level IX
Posts: 98
Joined: Wed Jul 27, 2016 9:58 pm

Re: Amber3 is out!

Post by kenbobplus3db » Fri Mar 01, 2019 10:44 pm

Can you please explain the winky-eye level meter a bit better? On the channel strip it seems active when the pre-amps are switched off, on the stereo EQ it seems to be active when the pre-amp is switched in.

It would also help to have a block diagram. Input trim obviously affects level through the preamp, but doesn't affect the signal gain hitting the compressor. Is the pre-amp gain compensation immediately following the preamp- before EQ and Compression?

Thank you.

Post Reply