The NAT tip of the month (#13 - September 2011)

Post by **enriquesilveti** » Tue Sep 06, 2011 5:59 pm

Exploring different preamp sessions.

We explore different sessions and settings based 3 online session in NAT3.

DISTORTED PRE (5 KERNELS) - SMOOTH1 - TEST
Template: Template_dynamic_1h (10K)
STONE enable: No
Amount: -
Linearity: -
Phase Locked: -

DISTORTED PRE (5 KERNELS) - SMOOTH2 - TEST
Template: Template_dynamic_1i (10K - smooth2)
STONE enable:: No
Amount: -
Linearity: -
Phase Locked: -

DISTORTED PRE (5 KERNELS) - STONE3 - TEST
Template: Template_dynamic_1i (10K - smooth2)
STONE enable: Yes
Amount: 1
Linearity: 1
Phase Locked: Yes

DISTORTED PRE (5 KERNELS) - STONE3 II - TEST
Template: Template_dynamic_1i (10K - smooth2)
STONE enable: Yes
Amount: 1
Linearity: 0
Phase Locked: Yes

DISTORTED PRE (5 KERNELS) - STONE3 III - TEST
Template: Template_dynamic_1i (10K - smooth2)
STONE enable: Yes
Amount: 1
Linearity: 1
Phase Locked: No

Conclucion: SMOOTH2 session will cover about the 95% of sampling needs. STONE3 session could be interest in some case but is important to know that frequency response is fake and harmonic distortion can be damaged several setting should be tested before get the best response. SMOOTH1 could be consider legacy session.

Read more about STONE here: http://www.acustica-audio.com/phpBB3/vi ... f=18&t=986