The NAT tip of the month (#9 - May 2011)

N.A.T. tips and tricks
Locked
User avatar
enriquesilveti
Expert
Expert
Posts: 2860
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

The NAT tip of the month (#9 - May 2011)

Post by enriquesilveti » Tue May 03, 2011 3:56 pm

Sampling a simple EQ

This type of sampling is only possible in NAT3, NAT3 FREE does not have multi page. We use offline sampling due we sample a well known EQ plug-in.

1. Open NAT3.
2. Open EQ 3 KNOBS (1 KERNEL) - SMOOTH2.N2X Session.
3. Fill Program Data information.
4. Close Sampler page and open Offline page.
5. Select a Temporary Data path
6. Save as your NAT Session in the same folder than your Temporary Data path
7. Open Multi page
8. Fill Multi page. We use a peak filter with one frequency at 1 kHz and one Q at 1.00. We use 3 levels, +10 dB, 0 dB and -10 dB.
9. Click on Generate.
10. Open generated file into your sequencer and create the necessary steps and files, with the correct setting in the plugin and bounce with the names indicated in instructions.txt file.
11. Click on deconvolve.
12. Move N2P and N2V files to their corresponding folders.
13. Load your filter and test it. You can use NAT or VST plug-in Analyser.
Attachments
SamplingASimpleEQ01.jpg
SamplingASimpleEQ01.jpg (146.01 KiB) Viewed 3573 times
SamplingASimpleEQ02.jpg
SamplingASimpleEQ02.jpg (130.2 KiB) Viewed 3573 times
SamplingASimpleEQ03.jpg
SamplingASimpleEQ03.jpg (115.48 KiB) Viewed 3573 times
SamplingASimpleEQ04.jpg
SamplingASimpleEQ04.jpg (139.76 KiB) Viewed 3573 times
SamplingASimpleEQ05.jpg
SamplingASimpleEQ05.jpg (144.36 KiB) Viewed 3573 times
SamplingASimpleEQ06.jpg
SamplingASimpleEQ06.jpg (181.06 KiB) Viewed 3573 times

Locked