NebulaMan / Setups Mac OSX support

Additional software tools
User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

NebulaMan / Setups Mac OSX support

Post by zabukowski » Sun Sep 08, 2013 11:12 pm

Important note for Mac users: NebulaMan is currently officially supported only on OSX 10.6.x.

I am not aware of any problems on 10.7.x, but several users reported that NebulaMan doesn’t run on 10.8.x. I am currently investigating this problem.

For the latest news, go to the last post.

Stay tuned.
Zabukowski

User avatar
cpwade
Vip Member
Vip Member
Posts: 373
Joined: Thu Dec 30, 2010 5:42 pm
Location: Colorado
Contact:

Re: NebulaMan Mac OSX support

Post by cpwade » Mon Sep 09, 2013 12:09 am

Hi Zab. I ran the demo on 10.8 no problem.

I have to say, about a year back I was not a big fan and most likely said so during the OSX growing pains. Moving forward, I re-ran the latest demo a few weeks back and was stunned. I retract all of my earlier opinions and NM is now on the "must buy" list. What an absolutely amazing tool.

Brilliant!

User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

Re: NebulaMan Mac OSX support

Post by zabukowski » Mon Sep 09, 2013 8:47 am

cpwade wrote:Hi Zab. I ran the demo on 10.8 no problem.

I have to say, about a year back I was not a big fan and most likely said so during the OSX growing pains. Moving forward, I re-ran the latest demo a few weeks back and was stunned. I retract all of my earlier opinions and NM is now on the "must buy" list. What an absolutely amazing tool.

Brilliant!
Hi Cpwade,

Glad you like the program :)

Regarding OSX, can you please specify the exact OSX and Nebula version you have installed.

Thanks!
Zabukowski

jkervin
User Level X
User Level X
Posts: 135
Joined: Mon Apr 11, 2011 7:31 pm

Re: NebulaMan Mac OSX support

Post by jkervin » Mon Sep 09, 2013 8:43 pm

Thanks for the heads up - I ordered my 10.8 upgrade (I'm at 10.6 now) yesterday and was going to install it this week!

User avatar
cpwade
Vip Member
Vip Member
Posts: 373
Joined: Thu Dec 30, 2010 5:42 pm
Location: Colorado
Contact:

Re: NebulaMan Mac OSX support

Post by cpwade » Tue Sep 10, 2013 1:15 am

[/quote]

Hi Cpwade,

Glad you like the program :)

Regarding OSX, can you please specify the exact OSX and Nebula version you have installed.

Thanks!
Zabukowski[/quote]

Cheers!

OS X 10.8.4 (12E55)
Processor 2.6 GHz Intel Core i7
Graphics NVIDIA GeForce GT 650M 1024 MB
Memory 8 GB 1600 MHz DDR3

User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

Re: NebulaMan Mac OSX support

Post by zabukowski » Tue Sep 10, 2013 7:11 am

cpwade wrote:
OS X 10.8.4 (12E55)
Processor 2.6 GHz Intel Core i7
Graphics NVIDIA GeForce GT 650M 1024 MB
Memory 8 GB 1600 MHz DDR3
Which version of Nebula do you have installed ?

Thanks!
Zabukowskiu

User avatar
cpwade
Vip Member
Vip Member
Posts: 373
Joined: Thu Dec 30, 2010 5:42 pm
Location: Colorado
Contact:

Re: NebulaMan Mac OSX support

Post by cpwade » Wed Sep 11, 2013 3:30 am

oops, sorry.. Nebula3 Server Mac OSX 1.3.502. I just moved to core 4 1.3.6 have not tried that with the demo yet.

User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

Re: NebulaMan Mac OSX support

Post by zabukowski » Sat Sep 21, 2013 12:06 pm

Just upgraded Snow Leopard (10.6.8) to the latest Mountain Lion (10.8.5).

I can confirm that both Nebula Setups 2 and NebulaMan work as expected here (Nebula Pro 1.3.505 installed).

Current known working configurations:

OSX 10.8.5 - Nebula Pro 1.3.505
OSX 10.8.4 - Nebula3 Server 1.3.502

Please let me know about your (non)working NebulaMan / Setups / Nebula config on Mountain Lion (if not already listed here).

Thanks!
Zabukowski

jkervin
User Level X
User Level X
Posts: 135
Joined: Mon Apr 11, 2011 7:31 pm

Re: NebulaMan / Setups Mac OSX support

Post by jkervin » Sat Sep 21, 2013 5:18 pm

Sweet!

I'll be trying out both with 1.3.6, probably tonight if I can get to it. I have been able to load both in 10.8 Mountain Lion.

Thanks, Zab!

User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

Re: NebulaMan / Setups Mac OSX support

Post by zabukowski » Thu Oct 03, 2013 8:40 am

This is a special test build of Nebula Setups 2, which was built on 10.8.5.

Users which has problems with crashes on 10.8.x, download and try this version. Please report your results here.

http://www.zabukowski.com/software/Nebu ... 20(ML).dmg

Thanks!
Zabukowski

FrankydT
User Level XI
User Level XI
Posts: 166
Joined: Tue Dec 28, 2010 3:47 pm

Re: NebulaMan / Setups Mac OSX support

Post by FrankydT » Fri Oct 04, 2013 2:23 am

Thanks,
I've tried it. But not working here.
It crashes immediately when I attempt to open it. (Crash on load)
If other people are running fine on 10.8.5, maybe it's an application conflict (It could be Little Snitch, Tinkertool System, anything)
To find it out, and limit possibilities,
I'll make a fresh reinstall of 10.8.5, check permissions, then I'll install Nebula 1.3.600 Server, and finally Nebula Setups.
If it will run fine, I'll try installing 1.3.602. (I'll try this on 10.6.8 too)
Then I'll try installing other applications one by one

In case of problems I'll let you know and I'll send you the Apple crash Report.

User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

Re: NebulaMan / Setups Mac OSX support

Post by zabukowski » Fri Oct 04, 2013 11:56 am

Sorry to hear about crashes, there is something strange going on :?

I've upgraded my MacBook from 10.6.8 to 10.8.5 and all programs runs without issues.

FrankydT, thanks a lot for your help, really appreciated! Looking forward to see your results with a clean install.

I will perform a clean 10.8.5 install on external disk as well - maybe there is something on my upgraded system, which is required for programs to run successfuly (i can't imagine what, though).

Zabukowski

FrankydT
User Level XI
User Level XI
Posts: 166
Joined: Tue Dec 28, 2010 3:47 pm

Re: NebulaMan / Setups Mac OSX support

Post by FrankydT » Sat Oct 05, 2013 8:26 am

Hi,
I've tried reinstalling ML 10.8.5 from scratch.
Installed only Nebula, Nebulaman, Nebula Setups, Reaper and RME Fireface driver

The only version here working fine is Nebula Pro Pro 1.3.600 but if I upgrade to Server (ANY version, 1.3.502, 1.3.505, 1.3.600, 1.3.602) Nebulaman and Setups crash immediately

If I trash preferences and Zabukowski folder in User/Library/Application Support, the FIRST TIME Nebulaman works.
It displays the message AQUA initialization error (The usual message of when it's cleanly installed), I set the usual preferences (Buffer, xml) then it crashes.
I think it's the preference file, if I'm wrong it's layout or nmsettings.
I think Nebulaman and Setups are not compatible with server, when they save/load/create these files they crash

Thank you for the assistance

Here's the Crash Report, you need the preference file too?
Attachments
Nebulaman Crash Report.rtf
(37.6 KiB) Downloaded 179 times

User avatar
zabukowski
Expert
Expert
Posts: 1645
Joined: Sun Mar 28, 2010 8:44 pm
Location: Ljubljana, Slovenia
Contact:

Re: NebulaMan / Setups Mac OSX support

Post by zabukowski » Sat Oct 05, 2013 9:37 am

Crash definitively happens with ACQUA/Nebula initialization - out of my control. If ACQUA is not initialized (first start), then program works. Looks like current ACQUA (1.3.504), 10.8.5 and Nebula Server are no go at the moment.

Strangely, I think Cpwade reported working config 10.8.4 and server.

Can you try to select xml config file, which is installed with PRO (delete setups preferences first)?

I will provide test build with the latest ACQUA (1.3.602) ASAP to see if crashes persist.

Thanks for your help!
Zabukowski

FrankydT
User Level XI
User Level XI
Posts: 166
Joined: Tue Dec 28, 2010 3:47 pm

Re: NebulaMan / Setups Mac OSX support

Post by FrankydT » Sat Oct 05, 2013 5:10 pm

Do you mean keeping the xml of the working Pro version, and to use this after upgrade to Server?
I'll try just now

Post Reply