Deconvolve session not creating program file

Tips & tricks, working results, technical support
Post Reply
User avatar
Henry Olonga
Expert
Expert
Posts: 580
Joined: Wed Mar 31, 2010 1:38 am
Location: Adelaide, South Australia
Contact:

Deconvolve session not creating program file

Post by Henry Olonga » Mon Aug 16, 2010 5:50 pm

Hi guys - very frustrating problem that I am experiencing and wondered if any experienced users could help. I am getting no N2P file although the deconvolve creates everything else including the N2V file. Any help appreciated. :cry:

User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Deconvolve session not creating program file

Post by enriquesilveti » Mon Aug 16, 2010 6:27 pm

Which NAT, which version of NAT, which session/template? did you try to decrease the number of samples/steps?
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

lordnielson
Member
Member
Posts: 253
Joined: Sun Mar 28, 2010 6:29 pm
Location: Copenhagen

Re: Deconvolve session not creating program file

Post by lordnielson » Mon Aug 16, 2010 7:17 pm

I had this problem but cannot for sure remember the reason.

Try optimising your program and then save and reopen before doing the sample session.

User avatar
Henry Olonga
Expert
Expert
Posts: 580
Joined: Wed Mar 31, 2010 1:38 am
Location: Adelaide, South Australia
Contact:

Re: Deconvolve session not creating program file

Post by Henry Olonga » Tue Aug 17, 2010 2:14 am

I am not sure what version - will check tomorrow. thanks guys

lordnielson
Member
Member
Posts: 253
Joined: Sun Mar 28, 2010 6:29 pm
Location: Copenhagen

Re: Deconvolve session not creating program file

Post by lordnielson » Tue Aug 17, 2010 7:36 am

enriquesilveti wrote:did you try to decrease the number of samples/steps?
Yeah that's it! I couldn't make compression programs work with more 45 steps. Ended up using 35 or less, I think.

User avatar
Henry Olonga
Expert
Expert
Posts: 580
Joined: Wed Mar 31, 2010 1:38 am
Location: Adelaide, South Australia
Contact:

Re: Deconvolve session not creating program file

Post by Henry Olonga » Mon Aug 23, 2010 12:11 am

Thanks for the help. These are all just ten kernel pre amp sessions. Anyway - I deconvolved a second time and it all ran through fine. I have had to do that a few times now.

User avatar
giancarlo
Founder
Founder
Posts: 10895
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Deconvolve session not creating program file

Post by giancarlo » Sun Aug 29, 2010 8:35 pm

I could release a commandline version of nat, which is very stable and is for x64 too. I'll wait a bit, it seems like velinas is going to release tools for other developers, maybe we'll release them at the same time.

Post Reply