How to get started: Sampling N*****n/Telefunken EQ's

Tips & tricks, working results, technical support
User avatar
rhodes54
User Level IV
User Level IV
Posts: 46
Joined: Wed Jun 30, 2010 8:44 pm
Location: Amsterdam

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by rhodes54 » Sat Jul 03, 2010 12:03 pm

One thing I forgot to ask: I made very nice 96K presets but how do I use them in a 44.1 project? Is there a possibility to resample them to 44.1?

lordnielson
Member
Member
Posts: 253
Joined: Sun Mar 28, 2010 6:29 pm
Location: Copenhagen

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by lordnielson » Sat Jul 03, 2010 1:33 pm

Nebula automatically resamples them to 44.1 in your daw.

User avatar
ngarjuna
Expert
Expert
Posts: 779
Joined: Tue Mar 30, 2010 5:04 pm
Location: Miami

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by ngarjuna » Sat Jul 03, 2010 1:52 pm

I work mostly at 44.1k and it seems like many (if not most) of the programs sampled and prepared at 96k do just fine using the internal conversion. I guess some people prefer a native 44.1k for faster load times but we're talking about a couple seconds, just not that critical to me.

You might just check out the 96k ones in a 44.1 environment and see how they do.

everbeatz
User Level VII
User Level VII
Posts: 75
Joined: Tue Apr 06, 2010 3:47 pm
Contact:

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by everbeatz » Sat Jul 03, 2010 2:36 pm

@rhodes54

can't wait to hear how those programs sound ;)

User avatar
rhodes54
User Level IV
User Level IV
Posts: 46
Joined: Wed Jun 30, 2010 8:44 pm
Location: Amsterdam

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by rhodes54 » Sat Jul 03, 2010 3:02 pm

ngarjuna wrote:You might just check out the 96k ones in a 44.1 environment and see how they do.


Well, that's the problem: at 44.1K my programs do not sound like they should if you compare them to the real EQ. I can almost say that it doesn't come even close! When starting a 96K project, it is very hard to hear the differences.

User avatar
scottkane
User Level X
User Level X
Posts: 132
Joined: Sun Apr 04, 2010 4:20 pm

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by scottkane » Sat Jul 03, 2010 6:05 pm

rhodes54 wrote:Hi all,

After reading a lot about Nebula I decided to buy it yesterday.


And you did very good!!!

welcome to the family :P
Cheers!!!
- graphics portfolio - music -

User avatar
rhodes54
User Level IV
User Level IV
Posts: 46
Joined: Wed Jun 30, 2010 8:44 pm
Location: Amsterdam

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by rhodes54 » Sat Jul 03, 2010 7:20 pm

scottkane wrote:And you did very good!!!
welcome to the family :P


Thanks!

Meanwhile I found out that the problem in gain differences seem to be caused by the fact that i'm sampling at 96K and I didn't manage to solve it.
Going back to 44.1K is the solution and everything is sampled well. I will stick to 44.1K for now as I have only two evenings left to sample the units before they will go back to the owner. Better good presets on 44.1K than bad ones on 96K.

User avatar
rhodes54
User Level IV
User Level IV
Posts: 46
Joined: Wed Jun 30, 2010 8:44 pm
Location: Amsterdam

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by rhodes54 » Mon Jul 05, 2010 1:00 pm

I only managed to do the N*****n PEV and PEV B EQ's because it took way more work than expected.
Nevertheless the result is great, especially for a first try. The presets come very close to the original and you will immediately hear the special sound of these EQ's. I especially love the PEV, which is the sweetest sounding of them all.

The presets can be found in the 3rd Party library
Last edited by rhodes54 on Mon Jul 05, 2010 2:34 pm, edited 1 time in total.

User avatar
tumburu
Vip Member
Vip Member
Posts: 462
Joined: Tue Mar 30, 2010 11:00 pm

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by tumburu » Mon Jul 05, 2010 1:05 pm

You forgot to add the link, I believe..

User avatar
rhodes54
User Level IV
User Level IV
Posts: 46
Joined: Wed Jun 30, 2010 8:44 pm
Location: Amsterdam

Re: How to get started: Sampling N*****n/Telefunken EQ's

Post by rhodes54 » Mon Jul 05, 2010 2:35 pm

tumburu wrote:You forgot to add the link, I believe..

You are right LOL. Updated now.

Post Reply