STN - Plex (Tape Delay)

Officially Licensed 3rd Party Developer Libraries
Free 3rd Party Programs
Definity
Member
Member
Posts: 309
Joined: Tue Apr 06, 2010 2:54 am

Re: signaltonoize.com - Plex (Tape Delay) – Update

Post by Definity » Wed Oct 17, 2012 8:28 pm

AWWWW SWEEET! but I cant afford it, have to stick with the original for now, I knew I shouldn't have got that KFC :roll:

elam
Vip Member
Vip Member
Posts: 425
Joined: Sat May 15, 2010 5:42 pm

Re: signaltonoize.com - Plex (Tape Delay) – Update

Post by elam » Wed Oct 17, 2012 9:59 pm

WOw! Thanks Eric.

Definity
Member
Member
Posts: 309
Joined: Tue Apr 06, 2010 2:54 am

Re: STN - Plex (Tape Delay)

Post by Definity » Fri Oct 19, 2012 9:20 am

Any one know what the BPM's are?

User avatar
gurth
User Level X
User Level X
Posts: 107
Joined: Sun Jul 04, 2010 10:48 am
Location: Holland

Re: STN - Plex (Tape Delay)

Post by gurth » Tue Dec 04, 2012 12:26 am

I got a little problem with plex 1, it looks like a kind of feedback problem, if i turn the dry slider down, the fx are getting louder and louder untill it goes too loud and starts crackling. Is it me?.... most of the time it is.... can anybody confirm?

Thanks very much.

User avatar
rhythminmind
Member
Member
Posts: 310
Joined: Sun May 16, 2010 10:12 pm
Location: New England Transplant to Los Angeles
Contact:

Re: STN - Plex (Tape Delay)

Post by rhythminmind » Tue Dec 04, 2012 1:41 am

So only with the 1st program? Trying to replicate, What Host/DAW/Samplerate?
"Any experiment of interest in life will be carried out at your own expense." http://rhythminmind.net - http://signaltonoize.com - http://popsound.com

User avatar
rhythminmind
Member
Member
Posts: 310
Joined: Sun May 16, 2010 10:12 pm
Location: New England Transplant to Los Angeles
Contact:

Re: STN - Plex (Tape Delay)

Post by rhythminmind » Tue Dec 04, 2012 2:01 am

Haven't been able to reproduce a feedback loop on my end, but see if this program solves your issue.
Attachments
Programs.zip
(10.4 KiB) Downloaded 56 times
Last edited by rhythminmind on Tue Dec 04, 2012 9:42 am, edited 1 time in total.
"Any experiment of interest in life will be carried out at your own expense." http://rhythminmind.net - http://signaltonoize.com - http://popsound.com

User avatar
gurth
User Level X
User Level X
Posts: 107
Joined: Sun Jul 04, 2010 10:48 am
Location: Holland

Re: STN - Plex (Tape Delay)

Post by gurth » Tue Dec 04, 2012 8:13 am

rhythminmind wrote:So only with the 1st program? Trying to replicate, What Host/DAW/Samplerate?
:
Thanks for the quick response, I am on a pc windows 7 64,with ableton live 8 on it my rate is 44.1 khz. I will try the program later this evening....

User avatar
gurth
User Level X
User Level X
Posts: 107
Joined: Sun Jul 04, 2010 10:48 am
Location: Holland

Re: STN - Plex (Tape Delay)

Post by gurth » Tue Dec 04, 2012 10:24 pm

I tried the program, but it did not change anything. And yes it is only on plex 1 program. When the plex1 is feedbacking and I put the fx sliders down it still takes allmost a minute till i don't hear it anymore.

Could it have something to do with

Frt: 96000 hz -) 96000 (- (blinking)

While my daw is at 44.1 khz?

User avatar
rhythminmind
Member
Member
Posts: 310
Joined: Sun May 16, 2010 10:12 pm
Location: New England Transplant to Los Angeles
Contact:

Re: STN - Plex (Tape Delay)

Post by rhythminmind » Tue Dec 04, 2012 10:32 pm

Not sure why that would cause a feedback loop issue, but if it's blinking you need to increase your "rate cnv" on the mast page. I have mine set to the max 9000.00 ms.

Once loaded it should read FRT: 96000 Hz -> 441000 Hz
"Any experiment of interest in life will be carried out at your own expense." http://rhythminmind.net - http://signaltonoize.com - http://popsound.com

User avatar
gurth
User Level X
User Level X
Posts: 107
Joined: Sun Jul 04, 2010 10:48 am
Location: Holland

Re: STN - Plex (Tape Delay)

Post by gurth » Tue Dec 04, 2012 10:54 pm

I have no clue why it caused feedback, but i am sur:e the feedback is gone!
,
I changed the rate to 9000 and everything is like, I love it.

Thanks very much eric...

Post Reply