cupwise release- Flucti-Mew Tube Compressor/Limiter

Officially Licensed 3rd Party Developer Libraries
Free 3rd Party Programs
Cupwise
Expert
Expert
Posts: 981
Joined: Tue Nov 23, 2010 2:03 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Cupwise » Mon Dec 05, 2016 1:54 am

botus99 wrote:This new skin update is awesome! Haven't tried the new programs yet, but I have a question.

The old Pass-Thru and Compressor skins had the 44.1k and 96k programs reversed on my system (I hit 44.1k SHQ and get 96k SHQ). Didn't really bother me, so I never said anything. It was just a quirk to remember.

Now with the new Compressor skin not having the typical Nebula window to view program parameters, I don't know how to find out if the skin is loading what it says it is.

Any thoughts?
you could try moving all of the 44.1khz programs out of the folder where you have them installed, temporarily. then open the skin and see if you can load those with the correct buttons. finding out what happens could give you some peace of mind, or give you something to report here!

RE301
Member
Member
Posts: 293
Joined: Tue Jan 06, 2015 4:49 pm

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by RE301 » Sun Dec 11, 2016 9:04 pm

Awesome - thanks! (Skin)

jpn
Vip Member
Vip Member
Posts: 376
Joined: Mon Apr 19, 2010 9:16 pm
Location: Portugal
Contact:

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by jpn » Mon Dec 12, 2016 8:53 am

Hi Guys .... Pass-Thru Skin will be updated soon .... You Can see a screenshot at : https://www.facebook.com/jpnskins/

Cupwise
Expert
Expert
Posts: 981
Joined: Tue Nov 23, 2010 2:03 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Cupwise » Wed Dec 28, 2016 6:47 am

just uploaded the update for JPN's pass through program(s) skin. this only updates the skin for the pass through programs. nothing else is changed. here it is:

http://www.cupwise.com/fx/product-updat ... update.zip

akirak
User Level 0
User Level 0
Posts: 6
Joined: Tue Nov 13, 2012 7:44 pm

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by akirak » Thu Jan 05, 2017 7:08 pm

hey! I'm a little puzzled..

I dropped new programs, which overwrote the previous ones. Then there's the 2016 vector ( I use now the 44.1 version only ) . Now, as I open Nebula, I see Compressor -> FM. No two versions, but should I keep the old vector with the new vector for the backwards compatibility? why two vectors?

Cupwise
Expert
Expert
Posts: 981
Joined: Tue Nov 23, 2010 2:03 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Cupwise » Thu Nov 23, 2017 5:39 pm

Just sent out emails for a new update to the library. Jpn wanted to do a new N4 skin so I took the opportunity to make a few improvements to the programs as well. The N3 skin is also updated. If you didn't get the email get in touch with me!

Updates list-

*New N4 skin by JPN!

*N3 skin has been updated. Cosmetically improved, and also the knobs in the old skin were a little buggy. You had to click on the top half of them to get them working. Fixed. Also, the following updates have been reflected in the skin.

*Dry control in the past was a control that just added some dry signal back in, but didn't lower the wet signal, so it was awkward to use. And actually, for this release, the dry control didn't even work at all! I didn't have it set up properly so it did nothing. Now the control is called 'wet' and acts as a wet/dry mixer control, which is WAY BETTER. Awesome.

*The hi-pass control for the internal side-chain went all the way up to 5khz, which was way too far. I don't think there's any real reason for it to go over 500hz, probably. Going all the way up to 5khz makes the range you might actually use take up a tiny range on the control, so it was harder to fine tune. Now it only goes up to 500hz.

*Fastest attack setting has been made even faster. It's barely noticeable but it allows for 'instant' peak reduction with less look-ahead.

*The look-ahead control used to go up to 10ms. Now it only goes up to 1.5ms. This allows me to remove the instructions about modifying the nebula .xml to get the old maximum of 10ms from the manual. You can get the instant peak reduction with less than 1.5ms now so it's not really needed to have so much look-ahead.

*Programs were found in 'FM' for 96khz, and 'FM*' for 44khz. I've been told Nebula doesn't support the '*' (even though it seems to just fine), so I'm slowly migrating all of my programs to new categories. Now they're in 'FM9' and 'FM4'.

*Program names have added numbers prefixed so they stay in the order I want them to appear in, inside N4 (which uses a different ordering scheme than N3).

*Removed the SHQ pass-through programs, because they really weren't necessary. The standard pass-through programs have been slightly updated and are just fine.

*Manual updated to reflect these changes. Skin install instructions moved to its own separate mini-manual.

User avatar
plexus
User Level XI
User Level XI
Posts: 191
Joined: Sat Jan 03, 2015 4:51 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by plexus » Thu Nov 23, 2017 6:57 pm

Very nice! Thanks very much for the update and the skin! Looks great
Screen Shot 2017-11-23 at 11.56.13 AM.png

Cupwise
Expert
Expert
Posts: 981
Joined: Tue Nov 23, 2010 2:03 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Cupwise » Thu Nov 23, 2017 7:00 pm

glad you like it! and you can thank jpn for the skin! :)

gus_vccs
User Level XI
User Level XI
Posts: 181
Joined: Sun Dec 06, 2015 10:17 pm

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by gus_vccs » Thu Nov 23, 2017 7:29 pm

Just bought it.

People have been praising this library a lot. I only have Luchpail, and it's really GREAT! So, if this is equally as good, I'll be very happy!

User avatar
babiuk
Vip Member
Vip Member
Posts: 379
Joined: Tue Oct 19, 2010 11:16 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by babiuk » Thu Nov 23, 2017 7:43 pm

Hi, Cupwise, I just saw the skin, it is amazing.

Are you planning blackfridaying on this?
Mac Pro 5,1 / 6-core Intel Xeon / 16 GB Ram / El Capitan / Reaper / H******* Mixbuss

Will The Weirdo
Vip Member
Vip Member
Posts: 380
Joined: Tue Apr 06, 2010 10:15 am
Location: On the lake
Contact:

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Will The Weirdo » Thu Nov 23, 2017 8:15 pm

Tim, I appreciate the N4 skin and update.
System 1 - i7 5820K Win 7 x64, Studio One 3.5, Reaper 5.4, Live 9.72

System 2 - AMD 1100T Win 7 x64, PT HD2 10.3.7

"In cognitively demanding fields, there are no naturals." - Simon and Chase

Cupwise
Expert
Expert
Posts: 981
Joined: Tue Nov 23, 2010 2:03 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Cupwise » Thu Nov 23, 2017 9:07 pm

babiuk wrote:Hi, Cupwise, I just saw the skin, it is amazing.

Are you planning blackfridaying on this?
i think i'll probably do something like 15-20% off for everything except the bundles.

User avatar
plexus
User Level XI
User Level XI
Posts: 191
Joined: Sat Jan 03, 2015 4:51 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by plexus » Thu Nov 23, 2017 9:17 pm

Cupwise wrote:glad you like it! and you can thank jpn for the skin! :)
I would but JPN thinks I talk too much.

jpn
Vip Member
Vip Member
Posts: 376
Joined: Mon Apr 19, 2010 9:16 pm
Location: Portugal
Contact:

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by jpn » Thu Nov 23, 2017 11:12 pm

plexus wrote:
Cupwise wrote:glad you like it! and you can thank jpn for the skin! :)
I would but JPN thinks I talk too much.
don´t you ? :mrgreen:

Cupwise
Expert
Expert
Posts: 981
Joined: Tue Nov 23, 2010 2:03 am

Re: cupwise release- Flucti-Mew Tube Compressor/Limiter

Post by Cupwise » Thu Nov 23, 2017 11:24 pm

cmon guys, lets all try to get along here ;)

Post Reply