Bricasti M7

Officially Licensed 3rd Party Developer Libraries
Free 3rd Party Programs
Owen
Beta Tester
Beta Tester
Posts: 153
Joined: Wed Mar 31, 2010 11:20 am

Re: Bricasti M7

Post by Owen » Tue Dec 03, 2013 3:04 pm

:) :) Wonderful
Hanging on a moment of truth here Henry.....

Made my day :)

brp
User Level IX
User Level IX
Posts: 99
Joined: Tue Mar 30, 2010 1:02 pm

Re: Bricasti M7

Post by brp » Tue Dec 03, 2013 7:13 pm

hi henry

maybe i was not clear enough about my point. waiting for such a great thing never was a problem to me. i shouldn't have written anything about x-mas etc..

my main point is this: few weeks ago i had a very interesting chat with a friend, where we were discussing the limitations of convolution reverbs, artificial modulation etc. after that i had some ideas of how to capture and recreate the non-static behavior of any kind of source.

your doings with the bricasti seam to be just a great place to look into this whole subject from this point of view, having the chance to get even better results at the end of the day! but as i stated in the last post, i can't guarantee for any success, it's all a bit on the experimental side. but who cares, i'll do this with absolutely no financial interests, i'll do this because it interests me and if i'll get something sounding similar to a bricasti at the end of the day, it was worth it all, not to mention the profit of the whole nebula community!!!

BTW your results are stunning, but by just adding an LFO modulating slowly the selection value, which is responsible for the selection of the convolutions you'll get results twice as good as yours. believe me, i just wet my pants five minutes ago ;-)

User avatar
Henry Olonga
Expert
Expert
Posts: 583
Joined: Wed Mar 31, 2010 1:38 am
Location: Adelaide, South Australia
Contact:

Re: Bricasti M7

Post by Henry Olonga » Tue Dec 03, 2013 7:54 pm

Hey BRP,
My reply wasn't directed at you so sorry if it appeared that way or as if I ignored you. I am intrigued with your extra tweak.

Can we take the conversation to e-mail?

Sales (at) nebularesets.com

I have not looked at the LFOs so please do discuss this with me.
Best
Henry

adam73
User Level III
User Level III
Posts: 32
Joined: Sat Feb 05, 2011 5:20 pm

Re: Bricasti M7

Post by adam73 » Sat Dec 07, 2013 9:35 pm

Thank you Henry :D , looking forward to trying this out

fito_88
User Level 0
User Level 0
Posts: 2
Joined: Tue Aug 21, 2012 8:40 pm

Re: Bricasti M7

Post by fito_88 » Fri Jan 03, 2014 6:41 am

I admire your work Mr Henry! Hats off for you and please keep it up with more fantastic libraries :)

User avatar
Henry Olonga
Expert
Expert
Posts: 583
Joined: Wed Mar 31, 2010 1:38 am
Location: Adelaide, South Australia
Contact:

Re: Bricasti M7

Post by Henry Olonga » Mon Jan 06, 2014 2:04 pm

Hey fito_88. You are very kind and I appreciate your support. ;). I will keep at it although it does get tight at times and one does feel that a lot of work goes into making libraries for modest reward. Posts like this are quite invigorating so thanks for that. :D

macsearcher
User Level 0
User Level 0
Posts: 8
Joined: Fri Nov 01, 2013 1:47 pm

Re: Bricasti M7

Post by macsearcher » Mon Jan 06, 2014 7:47 pm

Thank you so much for all of your hard work with this library.
I own an M7 and it is definitely one of those pieces of gear that's worth doing right. It's the tiny subtleties that, in the end, make it stand above other reverbs. They all add up.
Keep plugging away. Please let me know if you need any beta testing done. I am quite intimately familiar with the hardware.
Best Regards
Les

hopi2013
Beta Tester
Beta Tester
Posts: 141
Joined: Wed Jan 09, 2013 11:32 pm

Re: Bricasti M7

Post by hopi2013 » Wed Jan 08, 2014 6:04 am

Henry already knows this, so it's just a peak for anyone else... and I do know it has nothing to do really with the hard work of Henry and Micheal... and I really wish them both very well on this project.
..anyway, here's my candidate for an M7 skin:

Image

and yes, it is functioning, not just a PS image ;)

User avatar
cehas
User Level VIII
User Level VIII
Posts: 85
Joined: Wed Nov 24, 2010 3:03 pm

Re: Bricasti M7

Post by cehas » Wed Jan 08, 2014 3:30 pm

Nebula community.. like no other! :D

Absolutely awesome skin, you could make the preset/wheel section a bit smaller maybe, but the upper part is 10/10.

dagovitsj
Expert
Expert
Posts: 536
Joined: Sun Dec 19, 2010 7:25 pm

Re: Bricasti M7

Post by dagovitsj » Wed Jan 08, 2014 9:57 pm

Wow! Fantastic contribution to this community :D

@ cehas: agree, I also think the wheel could be a little smaller - or more correct, the space on the left and the right is like the hardware, but it's more 'space' on the hardware unit on top and bottom. So the wheel on the picture looks a little too big.

@ hopi2013: If the space could be equal on all four sides, I think it would look even greater :D
I actually watched a Bricasti hardware unit for the first time in a studio some weeks ago and took a picture, looking at it now - I think you have done a great job both with the colors and design!

Thought:
If the LFO-technique brp suggested turns out to be the 'magic key' to sample Bricasti. Could we expect to have a Nebula take on EMT 250 etc too?
|Win 7-64bit | Reaper 4. x64, Cubase 6.5.3., 64 & 32 bit | RAM:16 GB | CPU: Intel Core i5 [email protected] 2,8 GHz | Samsung SSD 830 (256 GB) | WD: Black harddisks | Graphics Card: NVIDIA GeForce 9800 GT Graphics Accelerator | Gigabyte GA-P55A-UD4 |Nebula 3 Pro |

User avatar
Henry Olonga
Expert
Expert
Posts: 583
Joined: Wed Mar 31, 2010 1:38 am
Location: Adelaide, South Australia
Contact:

Re: Bricasti M7

Post by Henry Olonga » Thu Jan 09, 2014 4:22 pm

Hopi,
Looks really cool. Great job.
H :D

hopi2013
Beta Tester
Beta Tester
Posts: 141
Joined: Wed Jan 09, 2013 11:32 pm

Re: Bricasti M7

Post by hopi2013 » Fri Jan 10, 2014 6:28 pm

guys, thanks for the comments

I'll take a look at the 'big' wheel size and see if it makes sense overall to make it smaller.. there are existing reasons for it's size that relate to the size of the invisible sliders that live where you see that wheel..

anyway... you can get it and give it spin [hahaha] from here:

http://stash.reaper.fm/v/19433/Briscati ... Nebula.zip

User avatar
Lonnie
Beta Tester
Beta Tester
Posts: 199
Joined: Mon Oct 25, 2010 11:30 pm

Re: Bricasti M7

Post by Lonnie » Sat Jan 18, 2014 9:28 am

High-five Hopi :)

hopi2013
Beta Tester
Beta Tester
Posts: 141
Joined: Wed Jan 09, 2013 11:32 pm

Re: Bricasti M7

Post by hopi2013 » Sat Jan 18, 2014 8:01 pm

thanks to all for the skin comments and I think I will leave the 'final' decision about the 'big wheel' size to Henry... Happy to alter it however he wants it, IF he wants it.

Now of course a skin for the M7 is nothing without the presets... right? So I wonder how this project is going??? Will it really happen or have the problems piled up too high? :geek:

User avatar
cehas
User Level VIII
User Level VIII
Posts: 85
Joined: Wed Nov 24, 2010 3:03 pm

Re: Bricasti M7

Post by cehas » Fri Feb 07, 2014 7:25 am

PLEASE Henry, give us some info, something, anything!

I'm scratching my head here and wondering if I should just release stuff instead of waiting to replace my verbs with this (if it's happening at all).

The hall demo was already incredibly good and I understand that it has to be as close as possibly, but..

I'd just like to finally know if this is buried or what.

Post Reply