Old Plate Problem

Acustica Audio's Official Included Library
Nebula3/N4 libraries (Rose, Violet, YROY)
Free Unregistered Version Libraries
Post Reply
farjedi
User Level X
User Level X
Posts: 140
Joined: Thu Apr 01, 2010 7:12 pm

Old Plate Problem

Post by farjedi » Wed Mar 02, 2011 4:49 pm

Sorry not sure where to post problems with programs, but I can't get the Old Plate series and Bubble goes ape spring verb to load, programs and vectors in correct folders, shows up in nebula plugin but will not load.
I'm really into the Old plate especially, so if any one can help with this that would be great...cheers

marcpl
User Level X
User Level X
Posts: 131
Joined: Wed Mar 31, 2010 7:39 pm

Re: Old Plate Problem

Post by marcpl » Wed Mar 02, 2011 5:19 pm

hi. are those programs defaulting to 'Init' when you try to load them? i just had a similar problem with some of the programs from the commercial library and in my case it was that i had to get a new authorization for my SER file.

good luck,
marco

farjedi
User Level X
User Level X
Posts: 140
Joined: Thu Apr 01, 2010 7:12 pm

Re: Old Plate Problem

Post by farjedi » Wed Mar 02, 2011 6:54 pm

yeah they have a go at loading up and then it just goes to init like you say..thanks for the reply

User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Old Plate Problem

Post by enriquesilveti » Wed Mar 02, 2011 8:28 pm

On a new and clean project? Are you on a X86 or x64 system? Did you enable debug mode? Seems to be a RAM problem or a N2P corrupted file.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

farjedi
User Level X
User Level X
Posts: 140
Joined: Thu Apr 01, 2010 7:12 pm

Re: Old Plate Problem

Post by farjedi » Mon Mar 07, 2011 8:51 pm

Yeah in a new project, X86 system. Tried deleting temp files, redownloaded from here to make sure it wasn't some download error, re installed my license key, still no joy. Some of the other reverbs from the acustica library work so it really is a baffling problem. The old plates are my favourite out of them and sorely missed.

User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Old Plate Problem

Post by enriquesilveti » Mon Mar 07, 2011 10:30 pm

Please upload those problematic N/V files to https://www.wetransfer.com/ we will do a deep test.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

Post Reply