Programs don't work after installing version 1.3.492

Tips & tricks, working results, technical support
Post Reply
lillosnx
User Level I
User Level I
Posts: 13
Joined: Fri Dec 10, 2010 3:06 pm

Programs don't work after installing version 1.3.492

Post by lillosnx » Fri Apr 20, 2012 7:31 pm

Programs start to load but at the end the init program shows up. Is it a registration issue? I also uploaded ser file but I received nothing. Can somebody help me please?

Thanks.

User avatar
TranscendingMusic
Expert
Expert
Posts: 1206
Joined: Sat Mar 27, 2010 7:01 am
Location: USA
Contact:

Re: Programs don't work after installing version 1.3.492

Post by TranscendingMusic » Sat Apr 21, 2012 12:13 am

You should send your ser file directly to Giancarlo instead. Once you get that authorized most libraries should show up. Some still won't because they are newer and need 1.5 and up.
Bob
mixing | mastering
Win 10 x64 | Cubase 9.5 Pro x64 |
Sonar Platinum x64 | 3930K(OC)

lillosnx
User Level I
User Level I
Posts: 13
Joined: Fri Dec 10, 2010 3:06 pm

Re: Programs don't work after installing version 1.3.492

Post by lillosnx » Sat Apr 21, 2012 2:58 pm

Thank you! I do as you say and wait for the result.

lillosnx
User Level I
User Level I
Posts: 13
Joined: Fri Dec 10, 2010 3:06 pm

Re: Programs don't work after installing version 1.3.492

Post by lillosnx » Sat Apr 21, 2012 7:47 pm

Nebula is now registered but not all programs are working. All the programs from the user Area are NOT working. Also Mammoth from AITB is not working. I sent a message to Giancarlo about it. I'm hopping it will be solved. Anybody knows something else I could do?

Thanks

User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Programs don't work after installing version 1.3.492

Post by enriquesilveti » Sat Apr 21, 2012 8:04 pm

lillosnx wrote:Nebula is now registered but not all programs are working. All the programs from the user Area are NOT working. Also Mammoth from AITB is not working. I sent a message to Giancarlo about it. I'm hopping it will be solved. Anybody knows something else I could do? Thanks
Use AITB online AUT delivery service to receive you AUT.
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

lillosnx
User Level I
User Level I
Posts: 13
Joined: Fri Dec 10, 2010 3:06 pm

Re: Programs don't work after installing version 1.3.492

Post by lillosnx » Mon Apr 23, 2012 10:13 pm

Hi again!
I have installed version 1.3.504 and all my 3rd party libraries now work.
But none of the acustica libraries work. Why is that? I really need some of the acustica libraries. Can somebody help me?
Could it be because of that I used my older authorization meaning the one before the upgrade to 1.3.504? And when I upload the ser file i receive nothing. Please help me.

lillosnx
User Level I
User Level I
Posts: 13
Joined: Fri Dec 10, 2010 3:06 pm

Re: Programs don't work after installing version 1.3.492

Post by lillosnx » Mon Apr 23, 2012 10:22 pm

Everything is solved now!!! Just needed a new ser! Thanks G and everybody

Post Reply