Nebula Program #0 Not Valid (here)

Tips & tricks, working results, technical support
User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: Nebula suddenly stopped working

Post by enriquesilveti » Sun Nov 28, 2010 9:13 pm

Could be a few reasons, we need to inspects in-depth, please re read my previous post, was updated
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

GalenBehr
User Level 0
User Level 0
Posts: 3
Joined: Mon Nov 08, 2010 5:34 pm

Re: Nebula suddenly stopped working

Post by GalenBehr » Sun Nov 28, 2010 9:44 pm

Giancarlo just sent me my license right after I emailed him and everything works again as it should. A-class support!

Thank you!

User avatar
giancarlo
Founder
Founder
Posts: 10906
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Nebula suddenly stopped working

Post by giancarlo » Sun Nov 28, 2010 10:04 pm

wtf.... a wrong name? send your ser to me, I'll fix it

Tekker
User Level 0
User Level 0
Posts: 9
Joined: Tue Mar 30, 2010 1:43 am

Re: Nebula suddenly stopped working

Post by Tekker » Mon Nov 29, 2010 4:10 am

It appears to be a time related bug.

I simply set back my system clock to the beginning of the month and IT INSTALLED and is working fine now.

Maybe that will help the Nebula gang track down what caused the problem. :)

-tkr

djjoshr
User Level 0
User Level 0
Posts: 1
Joined: Mon Nov 29, 2010 3:54 am

Re: Nebula suddenly stopped working

Post by djjoshr » Mon Nov 29, 2010 5:14 am

I have never used this program before and just purchased it!!
This is EXACTLY what happens to me when I attempt to run it...

NOT HAPPY.


I have no serial # or anything else either! $160 "poof"

Tekker
User Level 0
User Level 0
Posts: 9
Joined: Tue Mar 30, 2010 1:43 am

Re: Nebula suddenly stopped working

Post by Tekker » Mon Nov 29, 2010 5:35 am

No, your money is not "poof", they will fix it. :D

In the mean time try turning your system clock back to the beginning of the month (it appears to be a time related bug). Then you can install Nebula, get your SER file, and send in your SER file to get your registration.

-tkr

User avatar
himhui
Expert
Expert
Posts: 1173
Joined: Sun Mar 28, 2010 6:04 pm

Re: Nebula suddenly stopped working

Post by himhui » Mon Nov 29, 2010 5:46 am

It's funny that only my console stopped working suddenly (I created different categories) . I found that the INT.n2p disappaered in the console program folder and it worked again after it was replaced........
97v4 /Win10 x64 /64G ram /Nvidia Quadro K620
Reaper 5.7/X-Touch
Prism Orpheus /RME Babyface Pro

User avatar
Mimi
Member
Member
Posts: 235
Joined: Thu Aug 19, 2010 11:41 pm
Location: Brazil
Contact:

Re: Nebula suddenly stopped working

Post by Mimi » Mon Nov 29, 2010 6:04 am

hummmmmmm
Last edited by Mimi on Mon Nov 29, 2010 7:47 am, edited 1 time in total.

User avatar
giancarlo
Founder
Founder
Posts: 10906
Joined: Mon Sep 21, 2009 10:40 pm
Location: Italy

Re: Nebula suddenly stopped working

Post by giancarlo » Mon Nov 29, 2010 6:35 am

please note: setup installers are trying to install init files which expired.
THOSE INIT FILES EXPIRED, and it means that if you didn't install a license key over (or the license key was wrong or not correctly installed), your nebula expired too, and you can't run a setup version now.

I'll substitute setup versions for all plugins today, so you'll be able to generate SER files again.

So here what happened: INIT file copied by "setup installers" expired, but they were supposed to be substituted by the license key. At the moment if you try to run a setup version you have the same issue: you can't run nebula the first time because those INIT files expired. Wait for a new setup version.

If your nebula stopped working, simply you was not running correctly the key, or the key was WRONG or you was not running the key at all. If you installed the key over and now it's working it means the key was RIGHT but not installed correctly. A wrong key would expire immediatly AGAIN, and it's very unlike that it was expiring in the same expiration day of the INIT key located in setup versions.

hok
User Level I
User Level I
Posts: 14
Joined: Tue Mar 30, 2010 2:44 am

Re: Nebula suddenly stopped working

Post by hok » Mon Nov 29, 2010 12:19 pm

Hi,

Although my Neb3 Pro is still working fine (both commercial and third party libraries) I checked the Disk page and it says "REGISTERED: CUSTOMER" Is this correct? Will I have the problem as soon as the "Init" files expire? - if they do that is. I run the license installation again just in case but nothing changed in the Disk page.

Hok

Post Reply