high pass sidechain to compressor

Tips & tricks, working results, technical support
User avatar
enriquesilveti
Expert
Expert
Posts: 2858
Joined: Sun Mar 28, 2010 9:00 pm
Location: Lodi | Madrid | Buenos Aires
Contact:

Re: high pass sidechain to compressor

Post by enriquesilveti » Tue Nov 08, 2011 1:50 pm

I really need the hi pass filter added to Alex B MWD & 4kD.
Send an email...
Enrique Silveti.
Acustica Audio customer and technical support.

MBP 11.5 (i7-4870 | 16 GB | 512 SSD)
SP4 (i5-6300 | 8 GB | 256 SSD)
UFX | Lyra2 | USBPre2
VM U16 | VM Win10 CU | VM OSX 10.12
N4/NAT4 | SPX3 | RX6 | LN2C | Smaart8 | R5 | PT12 | PX10 | NIK5

Barendse
Vip Member
Vip Member
Posts: 446
Joined: Tue Mar 30, 2010 10:10 pm

Re: high pass sidechain to compressor

Post by Barendse » Tue Nov 08, 2011 2:27 pm

faun2500 wrote:
barron wrote:Does anyone know have any news about the Alexb libraries ?

I work in logic and ProTools and [as far as 'm aware] unable to use the quad channel trick on either.
I really need the hi pass filter added to Alex B MWD & 4kD.
+1!

dpclarkson
Member
Member
Posts: 320
Joined: Thu Apr 22, 2010 9:53 am

Re: high pass sidechain to compressor

Post by dpclarkson » Tue Nov 08, 2011 2:52 pm

+100!

nino
User Level X
User Level X
Posts: 108
Joined: Wed Dec 08, 2010 1:58 am

Re: high pass sidechain to compressor

Post by nino » Tue Nov 08, 2011 3:02 pm

Alex just answered to my mail, he is working on it though is busy with other stuff.
We can expect it in near future he said ;)

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: high pass sidechain to compressor

Post by richie43 » Tue Nov 08, 2011 5:29 pm

elam wrote: I think there's a little bit of confusion here.Richie if I got you correctly, what you want is already available (beside AITB protection issue).For "external" side-chain, the "S" programs,the one you can use in Reaper (with an external HPF of your choice),Mplay has aready gave them to us.Try to find on the forum his "side-chain" presets.Inside there are presets for both Snap and Fate compressor.

IF you are talking about the "internal" HPF side-chained,the one with the "range" button.Again it's already available on this thread for AITB's Snap an Fate compressor Mplay did the work for us.

So my question remain the same.Mplay ?

That's my point. I have all of the Mplay patches. Yes, Mplay did the work, but when I install the patches, the AITB compressors quit working. It bums me out! All of the non-AITB compressors work great with the patches. To my knowledge these patches will work on the older AITB comps, before the new copy protection.
The Sounds of the Hear and Now
http://soundyaudio.com/

Mplay
Member
Member
Posts: 290
Joined: Fri Aug 20, 2010 10:25 am
Location: Willemstad, Curaçao

Re: high pass sidechain to compressor

Post by Mplay » Tue Nov 08, 2011 7:18 pm

First of all, sorry for the late reply. Now I'm back :)

It's not possible to engage the hpf like it was possible with the arival of the sidechain. The program files have to be patched, so you'll have to wait for Alex to do his.

@Elam: You can change the steepness of the filter in the patched programs. It's on the bottom line of the EVF page. Where it reads ´0´ ´2´, you can change the ´2´ to ´4´ for a 4 pole filter.

elam
Vip Member
Vip Member
Posts: 425
Joined: Sat May 15, 2010 5:42 pm

Re: high pass sidechain to compressor

Post by elam » Tue Nov 08, 2011 9:18 pm

Thanks Mplay.

User avatar
david1103
Expert
Expert
Posts: 517
Joined: Wed Mar 31, 2010 12:26 am

Re: high pass sidechain to compressor

Post by david1103 » Tue Nov 08, 2011 10:15 pm

To my knowledge these patches will work on the older AITB comps, before the new copy protection.
richie43

please see my post in this same thread:

http://www.acustica-audio.com/forum/ind ... =50#p20094

the fate non protected version does not work properly!

i wish they would hurry up and release a proper update on Fate Comp with 96k and all the latest nebula compressor updates included. its over a year old now, practically abandonware.

richie43
Expert
Expert
Posts: 5041
Joined: Fri Feb 04, 2011 8:47 pm
Location: Minnesota, USA
Contact:

Re: high pass sidechain to compressor

Post by richie43 » Tue Nov 08, 2011 11:17 pm

david1103 wrote: its over a year old now, practically abandonware.
Sort of, but I still love this compressor.....
The Sounds of the Hear and Now
http://soundyaudio.com/

Post Reply